Highway Safety Product Testing
Future Labs specializes in the testing of highway safety products, including: Pavement Marking Thermoplastics, Glass Beads Epoxies, Acrylics, Ureas, Preformed Thermoplastic, Reflective Tape, Delineators, Cones, and Raised Pavement Markers.
Click here for Testing Submission Form (English/Spanish)
Price list temporarily unavailable. We apologize for any inconvenience.
ASTM Tests Performed:
| A 1087 | Using Hand Calipers |
| B 117 | Salt Fog |
| C 109 | Compressive Strength of Cubes of Mortars |
| C 157 | Length Change of Mortars |
| C 307 | Tensile Strength and Bondability of Compounds |
| C 338 | Softening Point of Glass |
| C 482 | Bond Strength of Ceramic Tile to Portland Cement Paste |
| C 501 | Resistance to Wear of Unglazed Ceramic Tile |
| C 531 | Thermal Expansion of Compounds |
| C 579 | Compressive Strength of Compounds |
| C 580 | Flexural Strength and Modulus of Elasticity of Compounds |
| C 679 | Tack-Free Time of Elastomeric Sealants |
| C 881 | Epoxy-Resin-Base Bonding Systems for Concrete |
| C 882 | Bond Strength of Epoxy-Resin Systems By Slant Shear |
| C 883 | Shrinkage of Epoxy-Resin Systems Used With Concrete |
| C 884 | Thermal Compatibility Between Concrete and an Epoxy-Resin Overlay |
| C 1028 | Coefficient of Friction |
| C 1202 | Ability to Resist Chloride Ion Penetration |
| C 1305 | Crack Bridging Ability Waterproofing Membrane |
| C 1583 | Tensile Strength of Concrete Repair |
| C 1648 | Index of Refraction (Beckeline Method) |
| D 36 | Softening Point |
| D 92 | Flash and Fire Points by Cleveland Open Cup Tester |
| D 93 | Flash Point by Pensky-Martens Closed Cup Tester |
| D 256 | Izod Pendulum Impact Resistance |
| D 476 | Classification for Dry Pigmentary Titanium Dioxide Products |
| D 482 | Ash from Petroleum Products |
| D 522 | Mandrel Bend Test of Attached Organic Coatings |
| D 523 | Specular Gloss |
| D 535 | Specifying Color by the Munsell System |
| D 562 | Cons. / Stormer Viscosity |
| D 562 | Viscosity Using a Stormer-Type Viscometer |
| D 570 | Water Absorption of Plastics |
| D 638 | Tensile Properties of Plastics only |
| D 648 | Deflection Temperature of Plastics Under Flexural Load |
| D 660 | Evaluation Degree of Checking of Exterior Paints |
| D 661 | Evaluating Degree of Cracking of Exterior Paints |
| D 695 | Compressive Properties of Rigid Plastics |
| D 711 | No-Pick-Up Time of Traffic Paint |
| D 714 | Evaluating Degree of Blistering of Paints |
| D 772 | Evaluating Degree of Flaking (Scaling) of Exterior Paints |
| D 790 | Flexural Properties |
| D 792 | Density and Specific Gravity |
| D 868 | Degree of Bleeding of Traffic Paint |
| D 869 | Degree of Settling Paint |
| D 870 | Water Resistance of Coatings Using Water Immersion |
| D 903 | Peel or Stripping Strength of Adhesive Bonds |
| D 962 | Density of Compacted or Sintered Power Metallurgy |
| D 968 | Abrasion Resistance of Organic Coatings by Falling Abrasive |
| D 969 | Degree of Bleeding of Traffic Paint (Withdrawn 2010) |
| D 1000 | 180 Degree Peal of Adhesive-Coated |
| D 1084 | Viscosity of Adhesives |
| D 1155 | Roundness of Glass Spheres |
| D 1200 | Viscosity by Ford Viscosity Cup |
| D 1210 | Fineness of Dispersion of Pigment-Vehicle Systems |
| D 1213 | Crushing Resistance of Glass Spheres (Withdrawn 1983) |
| D 1214 | Sieve Analysis of Glass Spheres |
| D 1259 | Nonvolatile Content of Resin Solutions |
| D 1310 | Flash Point and Fire Point of Liquids Open-Cup |
| D 1394 | Chemical Analysis of White Titanium Pigments |
| D 1475 | Density of Coatings |
| D 1583 | Tensile or Bond Strength to Concrete Surfaces |
| D 1640 | Drying, Curing, or Film Formation of Organic Coatings |
| D 1644 | Nonvolatile Content of Varnishes |
| D 1652 | Epoxy Content of Epoxy Resins |
| D 1653 | Water Vapor Transmission of Organic Coating Films |
| D 1654 | Evaluation of Painted or Coated Specimens Subjected to Corrosive Environments |
| D 1729 | Colors and Color Differences of Diffusely-Illuminated Opaque Materials |
| D 1737 | Elongation of Attached Organic Coatings with Cylindrical Mandrel |
| D 1849 | Package Stability of Paint |
| D 1925 | Yellowness Index of Plastics |
| D 2071 | Fatty Nitrogen Products |
| D 2074 | Total, Primary, Secondary, and Tertiary Amine Values of Fatty Amines |
| D 2196 | Rheological Properties of Non-Newtonian Materials by Rotational Viscometer |
| D 2240 | Rubber Property–Durometer Hardness |
| D 2243 | Freeze-Thaw Resistance of Water-Borne Coatings (5 cycles) |
| D 2244 | Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates |
| D 2369 | Volatile Content of Coatings (For Individual Components of Products) |
| D 2370 | Tensile Properties of Organic Coatings and Sample Prep |
| D 2371 | Pigment Content of Solvent-Reducible Paints |
| D 2372 | Separation of Vehicle From Solvent-Reducible Paints |
| D 2393 | Viscosity of Epoxy Resins (Withdrawn 1986) |
| D 2471 | Gel Time and Peak Exothermic Temperature of Reacting Thermosetting Resins (Withdrawn 2008) |
| D 2485 | Evaluating Coatings For High Temperature Service |
| D 2486 | Scrub Resistance of Wall Paints |
| D 2556 | Apparent Viscosity of Adhesives |
| D 2566 | Linear Shrinkage of Cured Thermosetting Casting Resins |
| D 2584 | Ignition Loss of Cured Reinforced Resins |
| D 2621 | Infrared Identification of Vehicle Solids from Solvent-Reducible |
| D 2697 | Volume Nonvolatile Matter in Clear or Pigmented Coatings |
| D 2698 | Determination of the Pigment Content of Solvent-Reducible Paints by High-Speed Centrifuging |
| D 2794 | Resistance of Organic Coatings to the Effects of Rapid Deformation (Impact) |
| D 2805 | Hiding Power of Paints |
| D 2832 | Determining Volatile and Nonvolatile Content or Paint and Related Coatings |
| D 3278 | Flash Point of Liquids by Small Scale Closed-Cup Apparatus |
| D 3335 | Low Concentrations of Lead, Cadmium, and Cobalt in Paint by Atomic Absorption Spectroscopy |
| D 3359 | Measuring Adhesion by Tape Test |
| D 3363 | Film Hardness by Pencil Test |
| D 3418 | Transition Temperatures and Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry |
| D 3718 | Low Concentrations of Chromium in Paint by Atomic Absorption Spectroscopy |
| D 3723 | Pigment Content of Water Emulsion Paints by Low-Temperature Ashing |
| D 3759 | Breaking Strength and Elongation of Pressure-Sensitive Tape |
| D 3960 | Standard Practice for Determining Volatile Organic Compound (VOC) Content of Paints and Related Coatings |
| D 4060 | Abrasion Resistance of Organic Coatings by the Taber Abraser |
| D 4061 | Test Method for Retroreflectance of Horizontal Coatings |
| D 4214 | Evaluating the Degree of Chalking of Exterior Paint Films |
| D 4239 | Sulfur in the Analysis Sample of Coal and Coke Using High-Temperature Tube Furnace Combustion |
| D 4280 | Testing on Extended Life Type, Nonplowable, Raised Retroreflective Pavement Markers |
| D 4383 | Testing on Plowable, Raised Retroreflective Pavement Markers |
| D 4402 | Viscosity Determination of Asphalt at Elevated Temperatures Using a Rotational Viscometer |
| D 4451 | Pigment Content of Paints by Low-Temperature Ashing |
| D 4505 | Daytime and Night Time Color, Skid Resistance and Adhesion at 3 temp., Retroreflection |
| D 4541 | Pull-off Strength of Coatings Using Portable Adhesion Tester |
| D 4585 | Testing Water Resistance of Coatings Using Controlled Condensation |
| D 4587 | Fluorescent UV-Condensation Exposures of Paint and Related Coatings |
| D 4592 | Daytime and Night Time Colors, Retroreflectivity, Skid Resistance and Adhesion |
| D 4764 | Determination by X-ray Fluorescence Spectroscopy of Titanium Dioxide Content in Paint |
| D 4726 | PVC Spec. Testing |
| D 4796 | Bond Strength of Thermoplastic Traffic Marking Materials |
| D 4797 | Gravimetric Analysis of White and Yellow Thermoplastic Traffic Marking (Melting, Sample Prep, Binder and Bead Content) |
| D 4812 | Unnotched Cantilever Beam Impact Resistance of Plastics |
| D 4960 | Evaluation of Color for Thermoplastic Traffic Marking Materials |
| D 5201 | Calculating Formulation Physical Constants of Paints and Coatings |
| D 5380 | Identification of Crystalline Pigments and Extenders in Paint by X-ray Diffraction Analysis |
| D 5381 | X-ray Fluorescence (XRF) Spectroscopy of Pigments and Extenders |
| D 5420 | Impact Resistance of Flat, Rigid Plastic Specimen by Means of a Striker Impacted by a Falling Weight (Gardner Impact) |
| D 5630 | Ash Content in Plastics |
| D 5894 | Cyclic Salt Fog/UV Exposure of Painted Metal |
| D 5895 | Evaluating Drying or Curing During Film Formation of Organic Coatings Using Mechanical Recorders |
| D 6247 | Determination of Elemental Content of Polyolefins by Wavelength Dispersive X-ray Fluorescence Spectrometry |
| D 6474 | Determining Molecular Weight Distribution and Molecular Weight Averages of POlyolefins by High Temperature Gel Permeation Chromatography |
| D 6578 | Testing of Graffiti Resistant Coating |
| D 6628 | Specification for Color of Pavement Marking Materials |
| D 6904 | Resistance to Wind-Driven Rain for Exterior Coatings Applied on Masonry |
| D 7234 | Pull-Off Adhesion Strength of Coatings on Concrete |
| D 7307 | Sampling of Thermoplastic Traffic Marking Materials |
| D 7308 | Sample Preparation of Thermoplastic Pavement Marking Materials |
| D 7539 | Using a Test Chamber for Humidity Conditioning of Test Panels of Pavement Marking Paints |
| D 7661 | Determining Compatibility of Personal Lubricants with Natural Rubber Latex Condoms |
| D 7735 | Type A Durometer Hardness Testing of Thermoplastic Pavement Marking at Elevated Temperatures |
| D 8161 | Impact Resistance of Thermoplastic Pavement Marking Materials |
| E 28 | Softening Point of Resin Derived from Pine Chemicals and Hydrocarbons, by Ring-and-Ball Apparatus |
| E 70 | pH of Liquid Paint |
| E 96 | Water Vapor Transmission of Organic Coating Films (Test Sample Prep for Wet or Dry) |
| E 303 | Skid Resistance Wet by British Pendulum Tester |
| E 313 | Calculating Yellowness and Whiteness Indices from Instrumentally Measured Color Coordinates |
| E 384 | Microindentation Hardness of Materials |
| E 1252 | Obtaining Infrared Spectra for Qualitative Analysis |
| E 1347 | Color and Color-Difference Measurement by Tristimulus Colorimetry |
| E 1349 | Reflectance Factor and Color by Spectrophotometry Using Bidirectional (45°:0° or 0°:45°) Geometry |
| E 1356 | Assignment of the Glass Transition Temperatures by Differential Scanning Calorimetry |
| E 1709 | Retroreflective Signs Using a Portable Retroreflectometer |
| E 1710 | Measurement of Retroreflective Pavement Marking Materials with CEN-Prescribed Geometry Using a Portable Retroreflectometer |
| E 2176 | Coefficient of Retroreflected Luminance of Pavement Mark |
| E 2177 | Coefficient of Retroreflected Luminance of Pavement Markings in a Standard Condition of Continuous Wetness |
| E 2832 | Coefficient of Retroreflected Luminance of Pavement Markings in a Standard Condition of Continuous Wetting (RL-2) |
| F 2617 | Heavy Metals in Polymeric Materials by XRF |
| F 2980 | Heavy Metals in Glass by XRF |
| G 20 | Chemical Resistance of Pipeline Coatings |
| G 154 | Operating Fluorescent Ultraviolet (UV) Lamp Apparatus |
| G 155 | Operating Xenon Arc Light Apparatus for Exposure |
AASHTO Tests Performed:
| M 427/T 346 | Glass Bead Testing |
| M 235 | Epoxy Resin Adhesives Testing |
| M 237/T 237 Type I-IV | Testing of Epoxy Resins |
| M 249/T 250 | Thermoplastic Pavement Marking Testing |
| M 249/T 250 | Preform Thermoplastic Pavement Marking Testing |
| NTPEP HFST | NTPEP High Friction and Thin Overlays Testing |
| PP-74 | Glass Bead Testing |
| PP-79 | High Friction Resin Testing |
| R 31 | Protective Coating Systems for Structural Steel Testing |
| T 27 | Aggregate Gradation |
| T 277/ASTM C 1202 | Chloride Ion Penetration |
Caltran Tests Performed:
| PTH-02ALKYD (Nov 2016) | Testing of Thermoplastic Traffic Striping Material per CALTRAN spec. PTH-02ALKYD |
| PTH-02SPRAY (Nov 2016) | Testing of Thermoplastic Traffic Striping Material per CALTRAN spec. PTH-02SPRAY |
| Test 669, Part 2 | Part 2 Bond Strength to Concrete using Epoxy Adhesive |
| Test 669, Part 8 | Compression Strength testing of RPM’s with 1 in. dia. punch and 3 in. dia. ring @ 0.2 in. per minute |
EN Tests Performed:
| EN:1062-11 UV | UVA bulbs for 4 hrs UV radiation at 60C and 4hrs Humidity at 50 C . (Cost per Hour) |
| EN:1062-3 | Determination of Liquid Water Permeability |
| EN:13036-4 | Measurement of Slip / Skid Resistance of a Surface |
| EN:1423 Annex B | Resistance of Glass Beads to Chemicals |
| EN:1463 | Road Marking Materials – Retroreflecting Road Studs – |
| EN:1871 | BS EN 1871:2000 Road marking materials. Physical properties |
| EN:4892-3 UV Method C | EN/ISO 4892-3 UV Method C using UVB-313. |
| EN:BS 6088- Gradation | Gradation Testing of Glass Beads |
| EN 1436 | Road Marking Materials – Road marking performance for Road Users |
EPA Tests Performed:
| EPA:24 | METHOD 24 – DETERMINATION OF VOLATILE MATTER CONTENT |
| EPA:3052 / 6010 | EPA Methods 3052 and 6010 for Pb and As |
| EPA:6200 | METHOD 6200..FIELD PORTABLE X-RAY FLUORESCENCE SPECTROMETRY |
| EPA:SW5050 / SW9056 | EPA SW 5050 – Bomb Preparation Method for Solid Waste |
| EPA:TCLP Metal & Sample Prep | Testing of sample under EPA 1311 and 6010B & 7407A |
Fed Std. Tests Performed:
| Fed Std:TTB 1325D- type I DC | Testing of glass beads per 1325D |
| Fed Std:TTP:1952F Table 1 or 2 | 1952F Table 1 or 2 Waterbased Paint testing |
| Fed Std 141: paint testing | Fed Std 141 paint testing |
DOT Tests Performed:
| Alaska DOT: Water-Based Paint | Alaska 2018 IBT 2518H004 |
| Alaska DOT: Glass Beads | Testing of Glass Beads |
| Alaska DOT: MMA | Testing of Methyl Methacrylate Paints |
| Alaska DOT: Solvent-Based Paint | Testing of Solvent Based Paint Under Fed Std AA 2886B |
| Alaska DOT: Water-Based Paint | Alaska 2018 IBT 2518H004 |
| Arizona DOT: 705-2.01 | Testing to Arizona 705-2.01 for Preformed Tape |
| Arizona DOT: AZDOT 708-2.1 | AZDOT Section 708 Permanent Pavement Markings |
| Arizona DOT: DOT 704 | Testing of Arizona Thermoplastic Pavement Markings |
| Arkansas DOT: Cold Weather WB | ARDOT Cold Weather WB Paint Section 718 Cost per Sample |
| Arkansas DOT: Sec 718 Std WB Paint | ARDOT Section 718 (2014) Standard WB Paint |
| Colorado DOT: 713.17 Epoxy | Epoxy Pavement Markings: Yellow |
| Colorado DOT: CODOT 713.08 Bead Testing | Testing of Glass Beads |
| Colorado DOT: Section 708-05 | Section 708-05 (May 12, 2016 for WB Traffic Paint |
| Connecticut DOT: M. 07.22 | Epoxy Resin Pavement Marking for ConnDOT |
| Florida DOT:403-2.1 Pretreatment | Testing of Pretreatment Epoxy per FDOT 403-2.1 |
| Florida DOT:523 Patterned Pavement | Testing of Patterned Pavement per FDoT spec. 523 |
| Florida DOT:527 DWS- ADA pads | Testing of Truncated Domes per FDoT spec. 527 |
| Florida DOT:971-2 Glass Beads | Testing of Glass Beads per FDOT 971-2 |
| Florida DOT:971-3 Standard Paint | Testing of Glass Beads per FDOT 971-2 |
| Florida DOT:971-4 Durable Paint | Testing of Durable Paint per FDOT 971-4 |
| Florida DOT:971-5 Reg Thermo with TCLP | Testing of Thermoplastic Pavement Marking per FDOT 971-1 & 5 |
| Florida DOT:971-6 Preformed Thermo | Testing of Performed Pavement Marking Thermoplastic per FDOT 971-6 |
| Florida DOT:971-7 Permanent Tape | Testing of Permanent Tape per FDOT 971-7 |
| Florida DOT:971-9 Epoxy | Testing of Epoxy Markings per FDoT 971-9 |
| Florida DOT:971-10 High Friction Thermo | Testing of Epoxy Markings per FDoT 971-9 |
| Florida DOT:971-11 Multi-Polymer | Testing of Epoxy Markings per FDoT 971-9 |
| Georgia DOT:GaDoT Preform | GaDoT Preform thermoplastic testing |
| Georgia DOT:GaDoT Thermo | GaDoT Pavement Marking thermoplastic testing per GaDoT spec. 653.2 |
| Georgia DOT:GDT-58 | GDT-58 Biquette Bond Testing @ 3 days cure |
| Georgia DOT:Sec 870.2.02 | Georgia DOT Supplemental Specification Section 870.2.02 Traffic Line Paints Testing |
| Illinois DOT:Bead Testing | Testing per ILLDOT for Glass Bead Testing |
| Illinois DOT:Hot Spray | Testing per ILLDOT for Hot Spray Thermoplastic Pavement Marking Compound. |
| Illinois DOT:Epoxy per Sec.1095.04 | Testing per ILLDOT Spec 1095.04 Epoxy Pavement Marking |
| Illinois DOT:Thermo per Sec. 1095.07 | Testing per ILLDOT Spec 1095.07 Thermoplastic Pavement Marking |
| Illinois DOT:Urea | Testing per ILLDOT Spec 1095.08 Urea Pavement Marking |
| Illinois DOT:Modified Urethane | Testing per ILLDOT Spec 1095.09 Modified Urethane Pavement Marking |
| Iowa DOT:Section 4183.03 Fast Dry | Testing of IowaDOT Section 4183.03 Fast Dry Waterborne Traffic Paints |
| Kansas DOT:Bead Embedment | Sample Prep & Bead Embedment per KsDOT procedure |
| Kansas DOT:Thermoplastic & Beads | Kansas DOT Section 2211 and AASHTO M-249 & M-247 |
| Kansas DOT:Water Resistance | Water Resistance of Water-Based Pavement Marking Paint |
| Kentucky DOT:Sec 842 WB Paint | Testing of KYDOT-grade water-based paint by Sec 842 |
| Kentucky DOT:Sec 846 Durable WB Paint | Testing of KYDOT-grade Durable water-based paint |
| Louisiana DOTD:HFST – Binder | Testing of High Friction Surface Binder per Louisiana DOT requirements |
| Louisiana DOTD:HFST – Binder (ccm) | Room Temp. – Testing of High Friction product Binder per Table 1 of Proposed AASHTO PP-79-17 HFS Low Modulus Epoxy Binder System |
| Louisiana DOTD:Thermoplastic | Testing of Thermoplastic Pavement Marking Specification 1015.10 |
| Maryland DOT:Md DOT Thermo | Testing to Maryland Thermoplastic Pavement Marking Specifications per AASHTO T-250 |
| Maryland DOT:MSMT 503 Concrete | MSMT 503 Releasing Properties of Form Release Compounds |
| Missouri DOT: Performance Spec Beads | MODOT glass beads performance spec : Gradation & Rounds – $250, Moisture Resistance $50, Chemical Resistance $90, Heavy Metals $75 |
| Missouri DOT:St Louis County Beads | St. Louis County Glass Beads (AASHTO M-247specs and T-346 Test Methods) |
| Montana DOT (MDT):MGS-03-06D | Testing of glass beads |
| Nevada DOT:NVDoT 729.03.05 | Rapid Dry Waterborne Paint Material |
| Nevada DOT:NVDoT 729.03.06 | Urea Pavement Marking |
| New Jersey DOT:Spec 912.03 | NJDOT grade Epoxy Traffic paint testing |
| New Mexico DOT:High Build Waterborne | New Mexico DOT permanent pavement markings,high build water base Testing |
| New Mexico DOT:NMDOT-Glass Beads | New Mexico DOT Specification Section 704-2.2 Testing of glass beads |
| New Mexico DOT:Section 704.2.5 | New Mexico DOT Thermoplastic Pavement Markings Testing |
| New Mexico DOT:Waterborne | New Mexico DOT Section 708 permanent pavement markings, water base Testing |
| New York City DOT:NY City Therm | Testing of Road Marking Thermoplastic |
| New York City DOT:Spec #727-05 Beads | NYCDOT testing of Glass Beads for Pavement Markings |
| New York City DOT:UREA | NYCDOT_UREA Testing |
| New York State DOT:NYDoT 727 | NYDoT Section 727 Testing of road marking thermoplastic |
| New York State DOT:NYDoT 727-03 Epoxy | NYDoT Section 727-03 for Epoxy Traffic paint testing |
| New York State DOT: NYDoT 727-09 WB paints | NYDoT Section 727-09 for WB Traffic paint testing |
| New York State DOT:NYDoT 727-20C | Purity of TiO2 |
| New York State DOT:NYDoT 727-05 Beads | NYDoT Glass Beads for Pavement Markings testing |
| North Carolina DOT:NCDOT Thermo | Testing NCDOT Pavement Marking Thermoplastic |
| North Carolina DOT:NCDoT Epoxy | Epoxy Traffic Paint Testing under the 2002 North Carolina DoT Specification 1087 – 7 |
| North Carolina DOT:NCDoT High Performance Glass | NCDoT High Performance Glass Bead testing |
| North Dakota DOT:DUP Sec. 880. | NDDOT Section 880.02 for Epoxy testing |
| Ohio DOT:Epoxy Analysis- Part A | Part A – OHDOT Epoxy testing |
| Ohio DOT:Epoxy Analysis- Part B | Part B- OHDOT Epoxy testing |
| Ohio DOT:Sand Penetration | OHDOT 705.25-A Sand Penetration |
| Ohio DOT:Thermoplastic | OHDOT 740.10 Thermoplastic Pavement Marking testing |
| Oregon DOT:RPM | Testing of raised pavement marker |
| Oregon DOT:Sec. 850/M 247 Glass | Testing of glass beads |
| Oregon DOT:Sec. 860.00 | Testing of Longitudinal Pavement Markings |
| Pennsylvania DOT:Delineators | PennDoT testing for Delineators and Adhesive |
| Pennsylvania DOT:RMT section 960 | PennDoT testing for Thermoplastic Pavement Markings |
| Pennsylvania DOT:Traffic Cones | PennDoT Traffic Cones testing |
| South Carolina DOT:HFS Binder Sec 2.1.1 | Testing of High Friction product Binder per High Friction Surface Treatment |
| South Carolina DOT:M-249 thermo | Testing of white and yellow SCDOT-grade road marking thermoplastic |
| Texas DOT:618-J Epoxy | TXDOT spec 618-J Epoxy Testing |
| Texas DOT:DMS 8290 | TXDOT DMS 8290 for Glass Beads testing |
| Texas DOT:DMS 8220 | Testing of Thermoplastic under TX DoT Specification 8220 |
| Utah DOT:Section 02765 | UDOT Section 02765, part 2 Table 4 Water-based High Build |
| Utah DOT:Utah DOT-Glass Beads | UDOT Section 02765M, 2.2 Glass Spheres Testing |
| Virginia DOT:WB Paint | Water Based Paint testing |
| Washington DOT:MMA testing | WSDOT Testing of MMA Paint |
| Washington DOT:Preform Thermo Sec 9-34.3(2) | WSDOT Sec 9-34.3(2) Preform Thermoplastic testing |
| Washington DOT : Solvent based Sec. 9-34.2(4) | WSDOT Sec 9-34.2(4) Solvent-Based Paint testing |
| Washington DOT: Standard WB Paint | WSDOT 9-34.2(5) Low VOC WB Paint testing |
| Washington DOT: Thermoplastic Sec. 9-34.3 | WSDOT Sec 9-34-3 Road Marking Thermoplastic testing |
Other Tests Performed:
| ACI 503 / ASTM D7234 | Tensile Cohesion/ Bond Strength of Epoxy on Concrete |
| Alabama Thermoplastic | Testing of Alabama grade road marking thermoplastic |
| Abrasion:Sand Blasting | Abrasion test by Sand Blasting method |
| ISO:13322-2 / 9276-6 | Particle Size ISO 13322-2 & Shape ISO 9276-6 analysis |
| ISO:2555 | Emulsions or Dispersions by the Brookfield Test Method |
| LA County Thermo | Performing Tests Required by LACOPW Specification on Thermoplastic Pavement Marking |
| MHD (Mass Highway):Type glass beads | Testing of MHD Type glass beads per MHD # M7.01.7 |
| MIL-PRF:9954C | PERFORMANCE SPECIFICATION: GLASS BEADS: FOR CLEANING AND PEENING MIL-PRF-9954C |
| MNDOT:Epoxy 3590.2 | MNDOT Epoxy 3590-2 (2018) Multi-Component Liquid Material |
| Preform Tape | Testing of skid resistance, tensile strength, elongation |
| Preform Thermo | Tests Performed on Road Marking Thermoplastic AASHTO M-249 / T-250 |
| Quebec Epoxy | Testing of colored epoxy for Quebec |