Highway Safety Product Testing
Future Labs specializes in the testing of highway safety products, including: Pavement Marking Thermoplastics, Glass Beads Epoxies, Acrylics, Ureas, Preformed Thermoplastic, Reflective Tape, Delineators, Cones, and Raised Pavement Markers.
Click here for Testing Submission Form
Price list temporarily unavailable. We apologize for any inconvenience.
ASTM Tests Performed:
| A 1087 | Using Hand Calipers |
| B 117 | Salt Fog |
| C 109 | Compressive Strength of Cubes of Mortars |
| C 157 | Length Change of Mortars |
| C 307 | Tensile Strength and Bondability of Compounds |
| C 338 | Softening Point of Glass |
| C 482 | Bond Strength of Ceramic Tile to Portland Cement Paste |
| C 501 | Resistance to Wear of Unglazed Ceramic Tile |
| C 531 | Thermal Expansion of Compounds |
| C 579 | Compressive Strength of Compounds |
| C 580 | Flexural Strength and Modulus of Elasticity of Compounds |
| C 679 | Tack-Free Time of Elastomeric Sealants |
| C 881 | Epoxy-Resin-Base Bonding Systems for Concrete |
| C 882 | Bond Strength of Epoxy-Resin Systems By Slant Shear |
| C 883 | Shrinkage of Epoxy-Resin Systems Used With Concrete |
| C 884 | Thermal Compatibility Between Concrete and an Epoxy-Resin Overlay |
| C 1028 | Coefficient of Friction |
| C 1202 | Ability to Resist Chloride Ion Penetration |
| C 1305 | Crack Bridging Ability Waterproofing Membrane |
| C 1583 | Tensile Strength of Concrete Repair |
| C 1648 | Index of Refraction (Beckeline Method) |
| D 36 | Softening Point |
| D 92 | Flash and Fire Points by Cleveland Open Cup Tester |
| D 93 | Flash Point by Pensky-Martens Closed Cup Tester |
| D 256 | Izod Pendulum Impact Resistance |
| D 476 | Classification for Dry Pigmentary Titanium Dioxide Products |
| D 482 | Ash from Petroleum Products |
| D 522 | Mandrel Bend Test of Attached Organic Coatings |
| D 523 | Specular Gloss |
| D 535 | Specifying Color by the Munsell System |
| D 562 | Cons. / Stormer Viscosity |
| D 562 | Viscosity Using a Stormer-Type Viscometer |
| D 570 | Water Absorption of Plastics |
| D 638 | Tensile Properties of Plastics only |
| D 648 | Deflection Temperature of Plastics Under Flexural Load |
| D 660 | Evaluation Degree of Checking of Exterior Paints |
| D 661 | Evaluating Degree of Cracking of Exterior Paints |
| D 695 | Compressive Properties of Rigid Plastics |
| D 711 | No-Pick-Up Time of Traffic Paint |
| D 714 | Evaluating Degree of Blistering of Paints |
| D 772 | Evaluating Degree of Flaking (Scaling) of Exterior Paints |
| D 790 | Flexural Properties |
| D 792 | Density and Specific Gravity |
| D 868 | Degree of Bleeding of Traffic Paint |
| D 869 | Degree of Settling Paint |
| D 870 | Water Resistance of Coatings Using Water Immersion |
| D 903 | Peel or Stripping Strength of Adhesive Bonds |
| D 962 | Density of Compacted or Sintered Power Metallurgy |
| D 968 | Abrasion Resistance of Organic Coatings by Falling Abrasive |
| D 969 | Degree of Bleeding of Traffic Paint (Withdrawn 2010) |
| D 1000 | 180 Degree Peal of Adhesive-Coated |
| D 1084 | Viscosity of Adhesives |
| D 1155 | Roundness of Glass Spheres |
| D 1200 | Viscosity by Ford Viscosity Cup |
| D 1210 | Fineness of Dispersion of Pigment-Vehicle Systems |
| D 1213 | Crushing Resistance of Glass Spheres (Withdrawn 1983) |
| D 1214 | Sieve Analysis of Glass Spheres |
| D 1259 | Nonvolatile Content of Resin Solutions |
| D 1310 | Flash Point and Fire Point of Liquids Open-Cup |
| D 1394 | Chemical Analysis of White Titanium Pigments |
| D 1475 | Density of Coatings |
| D 1583 | Tensile or Bond Strength to Concrete Surfaces |
| D 1640 | Drying, Curing, or Film Formation of Organic Coatings |
| D 1644 | Nonvolatile Content of Varnishes |
| D 1652 | Epoxy Content of Epoxy Resins |
| D 1653 | Water Vapor Transmission of Organic Coating Films |
| D 1654 | Evaluation of Painted or Coated Specimens Subjected to Corrosive Environments |
| D 1729 | Colors and Color Differences of Diffusely-Illuminated Opaque Materials |
| D 1737 | Elongation of Attached Organic Coatings with Cylindrical Mandrel |
| D 1849 | Package Stability of Paint |
| D 1925 | Yellowness Index of Plastics |
| D 2071 | Fatty Nitrogen Products |
| D 2074 | Total, Primary, Secondary, and Tertiary Amine Values of Fatty Amines |
| D 2196 | Rheological Properties of Non-Newtonian Materials by Rotational Viscometer |
| D 2240 | Rubber Property–Durometer Hardness |
| D 2243 | Freeze-Thaw Resistance of Water-Borne Coatings (5 cycles) |
| D 2244 | Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates |
| D 2369 | Volatile Content of Coatings (For Individual Components of Products) |
| D 2370 | Tensile Properties of Organic Coatings and Sample Prep |
| D 2371 | Pigment Content of Solvent-Reducible Paints |
| D 2372 | Separation of Vehicle From Solvent-Reducible Paints |
| D 2393 | Viscosity of Epoxy Resins (Withdrawn 1986) |
| D 2471 | Gel Time and Peak Exothermic Temperature of Reacting Thermosetting Resins (Withdrawn 2008) |
| D 2485 | Evaluating Coatings For High Temperature Service |
| D 2486 | Scrub Resistance of Wall Paints |
| D 2556 | Apparent Viscosity of Adhesives |
| D 2566 | Linear Shrinkage of Cured Thermosetting Casting Resins |
| D 2584 | Ignition Loss of Cured Reinforced Resins |
| D 2621 | Infrared Identification of Vehicle Solids from Solvent-Reducible |
| D 2697 | Volume Nonvolatile Matter in Clear or Pigmented Coatings |
| D 2698 | Determination of the Pigment Content of Solvent-Reducible Paints by High-Speed Centrifuging |
| D 2794 | Resistance of Organic Coatings to the Effects of Rapid Deformation (Impact) |
| D 2805 | Hiding Power of Paints |
| D 2832 | Determining Volatile and Nonvolatile Content or Paint and Related Coatings |
| D 3278 | Flash Point of Liquids by Small Scale Closed-Cup Apparatus |
| D 3335 | Low Concentrations of Lead, Cadmium, and Cobalt in Paint by Atomic Absorption Spectroscopy |
| D 3359 | Measuring Adhesion by Tape Test |
| D 3363 | Film Hardness by Pencil Test |
| D 3418 | Transition Temperatures and Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry |
| D 3718 | Low Concentrations of Chromium in Paint by Atomic Absorption Spectroscopy |
| D 3723 | Pigment Content of Water Emulsion Paints by Low-Temperature Ashing |
| D 3759 | Breaking Strength and Elongation of Pressure-Sensitive Tape |
| D 3960 | Standard Practice for Determining Volatile Organic Compound (VOC) Content of Paints and Related Coatings |
| D 4060 | Abrasion Resistance of Organic Coatings by the Taber Abraser |
| D 4061 | Test Method for Retroreflectance of Horizontal Coatings |
| D 4214 | Evaluating the Degree of Chalking of Exterior Paint Films |
| D 4239 | Sulfur in the Analysis Sample of Coal and Coke Using High-Temperature Tube Furnace Combustion |
| D 4280 | Testing on Extended Life Type, Nonplowable, Raised Retroreflective Pavement Markers |
| D 4383 | Testing on Plowable, Raised Retroreflective Pavement Markers |
| D 4402 | Viscosity Determination of Asphalt at Elevated Temperatures Using a Rotational Viscometer |
| D 4451 | Pigment Content of Paints by Low-Temperature Ashing |
| D 4505 | Daytime and Night Time Color, Skid Resistance and Adhesion at 3 temp., Retroreflection |
| D 4541 | Pull-off Strength of Coatings Using Portable Adhesion Tester |
| D 4585 | Testing Water Resistance of Coatings Using Controlled Condensation |
| D 4587 | Fluorescent UV-Condensation Exposures of Paint and Related Coatings |
| D 4592 | Daytime and Night Time Colors, Retroreflectivity, Skid Resistance and Adhesion |
| D 4764 | Determination by X-ray Fluorescence Spectroscopy of Titanium Dioxide Content in Paint |
| D 4726 | PVC Spec. Testing |
| D 4796 | Bond Strength of Thermoplastic Traffic Marking Materials |
| D 4797 | Gravimetric Analysis of White and Yellow Thermoplastic Traffic Marking (Melting, Sample Prep, Binder and Bead Content) |
| D 4812 | Unnotched Cantilever Beam Impact Resistance of Plastics |
| D 4960 | Evaluation of Color for Thermoplastic Traffic Marking Materials |
| D 5201 | Calculating Formulation Physical Constants of Paints and Coatings |
| D 5380 | Identification of Crystalline Pigments and Extenders in Paint by X-ray Diffraction Analysis |
| D 5381 | X-ray Fluorescence (XRF) Spectroscopy of Pigments and Extenders |
| D 5420 | Impact Resistance of Flat, Rigid Plastic Specimen by Means of a Striker Impacted by a Falling Weight (Gardner Impact) |
| D 5630 | Ash Content in Plastics |
| D 5894 | Cyclic Salt Fog/UV Exposure of Painted Metal |
| D 5895 | Evaluating Drying or Curing During Film Formation of Organic Coatings Using Mechanical Recorders |
| D 6247 | Determination of Elemental Content of Polyolefins by Wavelength Dispersive X-ray Fluorescence Spectrometry |
| D 6474 | Determining Molecular Weight Distribution and Molecular Weight Averages of POlyolefins by High Temperature Gel Permeation Chromatography |
| D 6578 | Testing of Graffiti Resistant Coating |
| D 6628 | Specification for Color of Pavement Marking Materials |
| D 6904 | Resistance to Wind-Driven Rain for Exterior Coatings Applied on Masonry |
| D 7234 | Pull-Off Adhesion Strength of Coatings on Concrete |
| D 7307 | Sampling of Thermoplastic Traffic Marking Materials |
| D 7308 | Sample Preparation of Thermoplastic Pavement Marking Materials |
| D 7539 | Using a Test Chamber for Humidity Conditioning of Test Panels of Pavement Marking Paints |
| D 7661 | Determining Compatibility of Personal Lubricants with Natural Rubber Latex Condoms |
| D 7735 | Type A Durometer Hardness Testing of Thermoplastic Pavement Marking at Elevated Temperatures |
| D 8161 | Impact Resistance of Thermoplastic Pavement Marking Materials |
| E 28 | Softening Point of Resin Derived from Pine Chemicals and Hydrocarbons, by Ring-and-Ball Apparatus |
| E 70 | pH of Liquid Paint |
| E 96 | Water Vapor Transmission of Organic Coating Films (Test Sample Prep for Wet or Dry) |
| E 303 | Skid Resistance Wet by British Pendulum Tester |
| E 313 | Calculating Yellowness and Whiteness Indices from Instrumentally Measured Color Coordinates |
| E 384 | Microindentation Hardness of Materials |
| E 1252 | Obtaining Infrared Spectra for Qualitative Analysis |
| E 1347 | Color and Color-Difference Measurement by Tristimulus Colorimetry |
| E 1349 | Reflectance Factor and Color by Spectrophotometry Using Bidirectional (45°:0° or 0°:45°) Geometry |
| E 1356 | Assignment of the Glass Transition Temperatures by Differential Scanning Calorimetry |
| E 1709 | Retroreflective Signs Using a Portable Retroreflectometer |
| E 1710 | Measurement of Retroreflective Pavement Marking Materials with CEN-Prescribed Geometry Using a Portable Retroreflectometer |
| E 2176 | Coefficient of Retroreflected Luminance of Pavement Mark |
| E 2177 | Coefficient of Retroreflected Luminance of Pavement Markings in a Standard Condition of Continuous Wetness |
| E 2832 | Coefficient of Retroreflected Luminance of Pavement Markings in a Standard Condition of Continuous Wetting (RL-2) |
| F 2617 | Heavy Metals in Polymeric Materials by XRF |
| F 2980 | Heavy Metals in Glass by XRF |
| G 20 | Chemical Resistance of Pipeline Coatings |
| G 154 | Operating Fluorescent Ultraviolet (UV) Lamp Apparatus |
| G 155 | Operating Xenon Arc Light Apparatus for Exposure |
AASHTO Tests Performed:
| M 427/T 346 | Glass Bead Testing |
| M 235 | Epoxy Resin Adhesives Testing |
| M 237/T 237 Type I-IV | Testing of Epoxy Resins |
| M 249/T 250 | Thermoplastic Pavement Marking Testing |
| M 249/T 250 | Preform Thermoplastic Pavement Marking Testing |
| NTPEP HFST | NTPEP High Friction and Thin Overlays Testing |
| PP-74 | Glass Bead Testing |
| PP-79 | High Friction Resin Testing |
| R 31 | Protective Coating Systems for Structural Steel Testing |
| T 27 | Aggregate Gradation |
| T 277/ASTM C 1202 | Chloride Ion Penetration |
Caltran Tests Performed:
| PTH-02ALKYD (Nov 2016) | Testing of Thermoplastic Traffic Striping Material per CALTRAN spec. PTH-02ALKYD |
| PTH-02SPRAY (Nov 2016) | Testing of Thermoplastic Traffic Striping Material per CALTRAN spec. PTH-02SPRAY |
| Test 669, Part 2 | Part 2 Bond Strength to Concrete using Epoxy Adhesive |
| Test 669, Part 8 | Compression Strength testing of RPM’s with 1 in. dia. punch and 3 in. dia. ring @ 0.2 in. per minute |
EN Tests Performed:
| EN:1062-11 UV | UVA bulbs for 4 hrs UV radiation at 60C and 4hrs Humidity at 50 C . (Cost per Hour) |
| EN:1062-3 | Determination of Liquid Water Permeability |
| EN:13036-4 | Measurement of Slip / Skid Resistance of a Surface |
| EN:1423 Annex B | Resistance of Glass Beads to Chemicals |
| EN:1463 | Road Marking Materials – Retroreflecting Road Studs – |
| EN:1871 | BS EN 1871:2000 Road marking materials. Physical properties |
| EN:4892-3 UV Method C | EN/ISO 4892-3 UV Method C using UVB-313. |
| EN:BS 6088- Gradation | Gradation Testing of Glass Beads |
| EN 1436 | Road Marking Materials – Road marking performance for Road Users |
EPA Tests Performed:
| EPA:24 | METHOD 24 – DETERMINATION OF VOLATILE MATTER CONTENT |
| EPA:3052 / 6010 | EPA Methods 3052 and 6010 for Pb and As |
| EPA:6200 | METHOD 6200..FIELD PORTABLE X-RAY FLUORESCENCE SPECTROMETRY |
| EPA:SW5050 / SW9056 | EPA SW 5050 – Bomb Preparation Method for Solid Waste |
| EPA:TCLP Metal & Sample Prep | Testing of sample under EPA 1311 and 6010B & 7407A |
Fed Std. Tests Performed:
| Fed Std:TTB 1325D- type I DC | Testing of glass beads per 1325D |
| Fed Std:TTP:1952F Table 1 or 2 | 1952F Table 1 or 2 Waterbased Paint testing |
| Fed Std 141: paint testing | Fed Std 141 paint testing |
DOT Tests Performed:
| Alaska DOT: Water-Based Paint | Alaska 2018 IBT 2518H004 |
| Alaska DOT: Glass Beads | Testing of Glass Beads |
| Alaska DOT: MMA | Testing of Methyl Methacrylate Paints |
| Alaska DOT: Solvent-Based Paint | Testing of Solvent Based Paint Under Fed Std AA 2886B |
| Alaska DOT: Water-Based Paint | Alaska 2018 IBT 2518H004 |
| Arizona DOT: 705-2.01 | Testing to Arizona 705-2.01 for Preformed Tape |
| Arizona DOT: AZDOT 708-2.1 | AZDOT Section 708 Permanent Pavement Markings |
| Arizona DOT: DOT 704 | Testing of Arizona Thermoplastic Pavement Markings |
| Arkansas DOT: Cold Weather WB | ARDOT Cold Weather WB Paint Section 718 Cost per Sample |
| Arkansas DOT: Sec 718 Std WB Paint | ARDOT Section 718 (2014) Standard WB Paint |
| Colorado DOT: 713.17 Epoxy | Epoxy Pavement Markings: Yellow |
| Colorado DOT: CODOT 713.08 Bead Testing | Testing of Glass Beads |
| Colorado DOT: Section 708-05 | Section 708-05 (May 12, 2016 for WB Traffic Paint |
| Connecticut DOT: M. 07.22 | Epoxy Resin Pavement Marking for ConnDOT |
| Florida DOT:403-2.1 Pretreatment | Testing of Pretreatment Epoxy per FDOT 403-2.1 |
| Florida DOT:523 Patterned Pavement | Testing of Patterned Pavement per FDoT spec. 523 |
| Florida DOT:527 DWS- ADA pads | Testing of Truncated Domes per FDoT spec. 527 |
| Florida DOT:971-2 Glass Beads | Testing of Glass Beads per FDOT 971-2 |
| Florida DOT:971-3 Standard Paint | Testing of Glass Beads per FDOT 971-2 |
| Florida DOT:971-4 Durable Paint | Testing of Durable Paint per FDOT 971-4 |
| Florida DOT:971-5 Reg Thermo with TCLP | Testing of Thermoplastic Pavement Marking per FDOT 971-1 & 5 |
| Florida DOT:971-6 Preformed Thermo | Testing of Performed Pavement Marking Thermoplastic per FDOT 971-6 |
| Florida DOT:971-7 Permanent Tape | Testing of Permanent Tape per FDOT 971-7 |
| Florida DOT:971-9 Epoxy | Testing of Epoxy Markings per FDoT 971-9 |
| Florida DOT:971-10 High Friction Thermo | Testing of Epoxy Markings per FDoT 971-9 |
| Florida DOT:971-11 Multi-Polymer | Testing of Epoxy Markings per FDoT 971-9 |
| Georgia DOT:GaDoT Preform | GaDoT Preform thermoplastic testing |
| Georgia DOT:GaDoT Thermo | GaDoT Pavement Marking thermoplastic testing per GaDoT spec. 653.2 |
| Georgia DOT:GDT-58 | GDT-58 Biquette Bond Testing @ 3 days cure |
| Georgia DOT:Sec 870.2.02 | Georgia DOT Supplemental Specification Section 870.2.02 Traffic Line Paints Testing |
| Illinois DOT:Bead Testing | Testing per ILLDOT for Glass Bead Testing |
| Illinois DOT:Hot Spray | Testing per ILLDOT for Hot Spray Thermoplastic Pavement Marking Compound. |
| Illinois DOT:Epoxy per Sec.1095.04 | Testing per ILLDOT Spec 1095.04 Epoxy Pavement Marking |
| Illinois DOT:Thermo per Sec. 1095.07 | Testing per ILLDOT Spec 1095.07 Thermoplastic Pavement Marking |
| Illinois DOT:Urea | Testing per ILLDOT Spec 1095.08 Urea Pavement Marking |
| Illinois DOT:Modified Urethane | Testing per ILLDOT Spec 1095.09 Modified Urethane Pavement Marking |
| Iowa DOT:Section 4183.03 Fast Dry | Testing of IowaDOT Section 4183.03 Fast Dry Waterborne Traffic Paints |
| Kansas DOT:Bead Embedment | Sample Prep & Bead Embedment per KsDOT procedure |
| Kansas DOT:Thermoplastic & Beads | Kansas DOT Section 2211 and AASHTO M-249 & M-247 |
| Kansas DOT:Water Resistance | Water Resistance of Water-Based Pavement Marking Paint |
| Kentucky DOT:Sec 842 WB Paint | Testing of KYDOT-grade water-based paint by Sec 842 |
| Kentucky DOT:Sec 846 Durable WB Paint | Testing of KYDOT-grade Durable water-based paint |
| Louisiana DOTD:HFST – Binder | Testing of High Friction Surface Binder per Louisiana DOT requirements |
| Louisiana DOTD:HFST – Binder (ccm) | Room Temp. – Testing of High Friction product Binder per Table 1 of Proposed AASHTO PP-79-17 HFS Low Modulus Epoxy Binder System |
| Louisiana DOTD:Thermoplastic | Testing of Thermoplastic Pavement Marking Specification 1015.10 |
| Maryland DOT:Md DOT Thermo | Testing to Maryland Thermoplastic Pavement Marking Specifications per AASHTO T-250 |
| Maryland DOT:MSMT 503 Concrete | MSMT 503 Releasing Properties of Form Release Compounds |
| Missouri DOT: Performance Spec Beads | MODOT glass beads performance spec : Gradation & Rounds – $250, Moisture Resistance $50, Chemical Resistance $90, Heavy Metals $75 |
| Missouri DOT:St Louis County Beads | St. Louis County Glass Beads (AASHTO M-247specs and T-346 Test Methods) |
| Montana DOT (MDT):MGS-03-06D | Testing of glass beads |
| Nevada DOT:NVDoT 729.03.05 | Rapid Dry Waterborne Paint Material |
| Nevada DOT:NVDoT 729.03.06 | Urea Pavement Marking |
| New Jersey DOT:Spec 912.03 | NJDOT grade Epoxy Traffic paint testing |
| New Mexico DOT:High Build Waterborne | New Mexico DOT permanent pavement markings,high build water base Testing |
| New Mexico DOT:NMDOT-Glass Beads | New Mexico DOT Specification Section 704-2.2 Testing of glass beads |
| New Mexico DOT:Section 704.2.5 | New Mexico DOT Thermoplastic Pavement Markings Testing |
| New Mexico DOT:Waterborne | New Mexico DOT Section 708 permanent pavement markings, water base Testing |
| New York City DOT:NY City Therm | Testing of Road Marking Thermoplastic |
| New York City DOT:Spec #727-05 Beads | NYCDOT testing of Glass Beads for Pavement Markings |
| New York City DOT:UREA | NYCDOT_UREA Testing |
| New York State DOT:NYDoT 727 | NYDoT Section 727 Testing of road marking thermoplastic |
| New York State DOT:NYDoT 727-03 Epoxy | NYDoT Section 727-03 for Epoxy Traffic paint testing |
| New York State DOT: NYDoT 727-09 WB paints | NYDoT Section 727-09 for WB Traffic paint testing |
| New York State DOT:NYDoT 727-20C | Purity of TiO2 |
| New York State DOT:NYDoT 727-05 Beads | NYDoT Glass Beads for Pavement Markings testing |
| North Carolina DOT:NCDOT Thermo | Testing NCDOT Pavement Marking Thermoplastic |
| North Carolina DOT:NCDoT Epoxy | Epoxy Traffic Paint Testing under the 2002 North Carolina DoT Specification 1087 – 7 |
| North Carolina DOT:NCDoT High Performance Glass | NCDoT High Performance Glass Bead testing |
| North Dakota DOT:DUP Sec. 880. | NDDOT Section 880.02 for Epoxy testing |
| Ohio DOT:Epoxy Analysis- Part A | Part A – OHDOT Epoxy testing |
| Ohio DOT:Epoxy Analysis- Part B | Part B- OHDOT Epoxy testing |
| Ohio DOT:Sand Penetration | OHDOT 705.25-A Sand Penetration |
| Ohio DOT:Thermoplastic | OHDOT 740.10 Thermoplastic Pavement Marking testing |
| Oregon DOT:RPM | Testing of raised pavement marker |
| Oregon DOT:Sec. 850/M 247 Glass | Testing of glass beads |
| Oregon DOT:Sec. 860.00 | Testing of Longitudinal Pavement Markings |
| Pennsylvania DOT:Delineators | PennDoT testing for Delineators and Adhesive |
| Pennsylvania DOT:RMT section 960 | PennDoT testing for Thermoplastic Pavement Markings |
| Pennsylvania DOT:Traffic Cones | PennDoT Traffic Cones testing |
| South Carolina DOT:HFS Binder Sec 2.1.1 | Testing of High Friction product Binder per High Friction Surface Treatment |
| South Carolina DOT:M-249 thermo | Testing of white and yellow SCDOT-grade road marking thermoplastic |
| Texas DOT:618-J Epoxy | TXDOT spec 618-J Epoxy Testing |
| Texas DOT:DMS 8290 | TXDOT DMS 8290 for Glass Beads testing |
| Texas DOT:DMS 8220 | Testing of Thermoplastic under TX DoT Specification 8220 |
| Utah DOT:Section 02765 | UDOT Section 02765, part 2 Table 4 Water-based High Build |
| Utah DOT:Utah DOT-Glass Beads | UDOT Section 02765M, 2.2 Glass Spheres Testing |
| Virginia DOT:WB Paint | Water Based Paint testing |
| Washington DOT:MMA testing | WSDOT Testing of MMA Paint |
| Washington DOT:Preform Thermo Sec 9-34.3(2) | WSDOT Sec 9-34.3(2) Preform Thermoplastic testing |
| Washington DOT : Solvent based Sec. 9-34.2(4) | WSDOT Sec 9-34.2(4) Solvent-Based Paint testing |
| Washington DOT: Standard WB Paint | WSDOT 9-34.2(5) Low VOC WB Paint testing |
| Washington DOT: Thermoplastic Sec. 9-34.3 | WSDOT Sec 9-34-3 Road Marking Thermoplastic testing |
Other Tests Performed:
| ACI 503 / ASTM D7234 | Tensile Cohesion/ Bond Strength of Epoxy on Concrete |
| Alabama Thermoplastic | Testing of Alabama grade road marking thermoplastic |
| Abrasion:Sand Blasting | Abrasion test by Sand Blasting method |
| ISO:13322-2 / 9276-6 | Particle Size ISO 13322-2 & Shape ISO 9276-6 analysis |
| ISO:2555 | Emulsions or Dispersions by the Brookfield Test Method |
| LA County Thermo | Performing Tests Required by LACOPW Specification on Thermoplastic Pavement Marking |
| MHD (Mass Highway):Type glass beads | Testing of MHD Type glass beads per MHD # M7.01.7 |
| MIL-PRF:9954C | PERFORMANCE SPECIFICATION: GLASS BEADS: FOR CLEANING AND PEENING MIL-PRF-9954C |
| MNDOT:Epoxy 3590.2 | MNDOT Epoxy 3590-2 (2018) Multi-Component Liquid Material |
| Preform Tape | Testing of skid resistance, tensile strength, elongation |
| Preform Thermo | Tests Performed on Road Marking Thermoplastic AASHTO M-249 / T-250 |
| Quebec Epoxy | Testing of colored epoxy for Quebec |